Show internal buffering Command
This shows the size options (Maximum, Minimum, or Medium) of the Receive (Rx)
buffer allocated to each port of the specified module.
The syntax for this command is:
show internal buffering [<mod_num>]
Example:
Cajun_P330-N> show internal buffering 1
Module
------
1
Show intermodule port redundancy Command
Use the show intermodule redundancy command to display the intermodule
redundancy entry defined for the stack.
The syntax for this command is:
show intermodule port redundancy
Example:
Cajun_P330-N> show intermodule port redundancy
Primary-Port
Primary-Port status
Secondary-Port
Secondary-Port status
Avaya P333T User's Guide
Internal Buffer
---------------
med
Chapter 6
Cajun Campus CLI – Layer 2
: 1/1
: Disable
: 1/2
: Disable
61