Rmon History Command; Rmon Alarm Command - Avaya P333T User Manual

Rmon history Command

Use the rmon history command to create an RMON history entry.
The syntax for this command is:
rmon history <history index> <interface> interval <interval>
buckets <number of buckets> owner <owner name>
history_index
interface
interval
number of
buckets
owner name
Example:
Cajun_P330-N# rmon history 1026 1026 interval 30 buckets 20
owner amir
history 1026 was created successfully

Rmon alarm Command

Use the rmon alarm command to create a new RMON alarm entry.
The syntax for this command is:
rmon alarm <Alarm Number> <variable> <interval> <sampletype>
rising-threshold <rising threshold> <rising event> falling-
threshold <falling threshold> <falling event> <startup alarm>
<owner>
alarm
number
variable
interval
Avaya P333T User's Guide
This is the history index number of this entry (it is advisable to
use the same interface number as your history index number)
The Interface number is a unique number for each port which
can be calculated as follows:
1024 x Module Number + Port Number
For example: Port 3 in Module 1 has an Inter Number of 1027.
The interval between 2 samples
The number of buckets defined
Owner name string
This is the alarm index number of this entry (it is advisable to use
the same interface number as your alarm index number.)
This is the MIB variable which will be sampled by the alarm entry.
The interval between 2 samples
Chapter 6 Cajun Campus CLI – Layer 2
107