Connecting The Lan Ethernet Cable - Avaya 1140E Install Manual

Perform the following procedure to select a headset.
1. Press Prefs.
2. Select Audio.
3. Select Headset

Connecting the LAN ethernet cable

Note: Your IP Deskphone supports both AC power and PoE options,
including IEEE 802.3 standard power. To use local AC power, you can order
the optional AC adapter separately. To use PoE, where power is delivered
over the CAT5 cable, the LAN must support PoE, and you do not need an
AC adapter.
To enable full functionality of your IP Deskphone, connect your
IP Deskphone to your LAN using a CAT5e Ethernet cable. If your network is
equipped with PoE, you can power your IP Deskphone through the LAN port.
To connect your IP Deskphone to your LAN use the following procedure:
1. Connect one end of the supplied Ethernet cable to the back of your IP
Deskphone by using the RJ-45 connector marked with the % symbol.
2. Thread the network cable through the channel marked with the %
symbol.
3. Connect the other end of the cable to your LAN Ethernet connection.
To connect your PC through your IP Deskphone use the following
procedure:
1. Connect one end of the PC Ethernet cable to your IP Deskphone using
the RJ-45 connector marked with the % symbol.
2. Thread the cable through the channel marked with the ( symbol.
3. Connect the other end of the cable to the LAN connector on the back of your
PC.
Type.
Using your IP Deskphone