Connecting The Handset - Avaya E169 Manual

Ip media station

Hide thumbs Also See for E169:

Table of Contents

3. Plug the USB cable into the left USB port on the rear of the media station.

Connecting the handset

Procedure

1. Plug the handset cable into the right USB port on the rear of the media station. Route the

cable through the channels under the media station.

2. Put the handset cradle on top of the media station. Put the handset in the handset cradle.

Position the cradle so that the magnets secure the holder on the media station.

Note:

If more convenient for you, you can put the handset cradle and handset on any location

on your desk. Regardless of placement, the handset must rest in the handset cradle.

June 2014

Installing and Maintaining the Avaya E169 IP Media Station

Comments? infodev@avaya.com

Connectivity

Table of Contents