Web Browser Setup And Display - Omron CP1H-X40D Operation Manual

Web Browser Setup and Display

9-10 Web Browser Setup and Display
9-10-1 Multi-language Function
9-10-2 Overview of Web Browser Function
If the local IP address in the system setup is set to 0.0.0.0, this area will act as
an IP address setting area. The value will be read by the Ethernet Option
Board when the power is turned ON or the Ethernet Option Board restarted
and is used as the local IP address.
If the IP address for accessing the Ethernet Option Board through Web browser
is forgotten, find out it in this area.
Note When IP address in system setup area and DM area are all set to 0.0.0.0, the
IP address will be 192.168.250.1 (FINS node address).
The WEB server supports the multi-language function. The supported lan-
guages are English, Chinese and Japanese.
Before setting, users should select the appropriate language in the following
ULC.
English page: http://(Ethernet Option Board's IP address)/E00.htm
Japanese page: http://(Ethernet Option Board's IP address)/J00.htm
Chinese page: http://(Ethernet Option Board's IP address)/C00.htm
System setup for the Ethernet Option Board is as follows.
System
HTTP
IP Address Table
IP Router Table
FINS/TCP
Monitor status for the Ethernet Option Board is as follows.
Unit information
Unit status
FINS status
Error log
Setting Item
IP Address
Subnet Mask
FINS Node Address
FINS/UDP Port
FINS/TCP Port
Address Conversion Mode
FINS/UDP Option
Broadcast Option
FINS/TCP Protected
WEB Password
Port No.
FINS Node Address
IP Address
IP Network Address
Router IP Address
IP Address
Auto-allocated FINS Node
Status
Section 9-10
Reference Page
572
572
572
572
572
572
572
573
573
574
574
575
575
576
576
577
577
Reference Page
578
579
580
581
571