Mounting
Mounting Dimensions
Mounting Height
3-3-2
Connecting CP-series Expansion Units and Expansion I/O Units
Mounting Method
100±0.2
For the dimensions of Units other than CP1H CPU Units, refer to Appendix B
Dimensions Diagrams.
The mounting height is approximately 90 mm.
When a cable is connected to an Option Board, however, the additional height
must be factored in. Always allow for the additional height when considering
the depth of the control panel in which the PLC is to be mounted.
Leave approximately 10 mm of space between the CPU Unit and the Expan-
sion Units or Expansion I/O Units.
CP1H CPU Unit
10 mm
A
CP1H CPU Unit
100 mm
Expansion I/O Unit
Expansion Unit
140±0.5
Expansion I/O Units or Expansion Units
8 mm
Section 3-3
Four, M4
113