Analog I/O Units - Omron CP1H-X40D Operation Manual

Analog I/O Units

7-4 Analog I/O Units
7-4-1 CP1W-MAD11 Analog I/O Units
Part Names
CP1W-MAD11
(2) Expansion I/O connecting cable
414
Each CP1W-MAD11 Analog I/O Unit provides 2 analog inputs and 1 analog
output.
• The analog input range can be set to 0 to 5 VDC, 1 to 5 VDC, 0 to
10 VDC, −10 to 10 VDC, 0 to 20 mA, or 4 to 20 mA. The inputs have a
resolution of 1/6000.
An open-circuit detection function is activated in the ranges of 1 to 5 VDC
and 4 to 20 mA.
• The analog output range can be set to 1 to 5 VDC, 0 to 10 VDC, −10 to
10 VDC, 0 to 20 mA, or 4 to 20 mA. The outputs have a resolution of
1/6000.
NC NC
(1) Analog I/O Terminals
Connected to analog I/O devices.
NC
NC
I OUT
N C N C
V OUT COM
N C
Note For current inputs, short V IN0 to I IN0 and V IN1 to I IN1.
V OUT Voltage output
I OUT Current output
COM Output common
V IN0 Voltage input 0
I IN0 Current input 0
COM0 Input common 0
V IN1 Voltage input 1
I IN1 Current input 1
COM1 Input common 1
(4) DIP switch
(3) Expansion connector
(1) Analog I/O terminals
(Terminal block is not removable)
V IN0 COM0 I IN1 A G
N C I IN0 V IN1 COM1
Section 7-4