Omron CP1H-X40D Operation Manual page 144

Mounting
DIN Track Installation
Using I/O Connecting
Cable
Expansion
SYSMAC
CP1H IN
L1 L2/N COM 01 03 05 07 09 11 01 03
BATTERY
00 02 04 06 08 10 00 02 04
POWER
PERIPHERAL
ERR/ALM
BKUP
MEMORY
00 01 02 03 04 06 00 01
COM COM COM COM 05 07 COM
100CH 101CH
OUT
110
CJ-series Special I/O Units or CPU Bus Units must be mounted to a DIN
Track, along with the CP1H CPU Unit. Secure the DIN Track with screws in at
least three places.
When using CP-series Expansion Units and Expansion I/O Units, it is possible
to use CP1W-CN811 Connecting Cable to arrange the Units in upper and
lower rows. The following restrictions apply:
• I/O Connecting Cable can be used between only the CPU Unit and the
first four Expansion Units and Expansion I/O Units. It cannot be used from
the fifth Unit onwards.
• I/O Connecting Cable can be used in one place only, and not in multiple
places.
1 st Unit 2 nd Unit
Can be used.
05 07 09 11
06 08 10
EXP
03 04 06
02 COM 05 07
1CH
CP1W-EXT01
CJ Unit Adapter
CJ-series CPU Bus Unit or Special I/O Unit
3 rd Unit 4 th Unit 5 th Unit
Cannot be used.
Section 3-3
CJ1W-TER01
CJ-series End Cover
(included with CJ Unit Adapter)
DIN Track
6 th Unit 7 th Unit