Connecting Programming Devices; Connecting To A Usb Port - Omron CP1H-X40D Operation Manual

Cpu unit sysmac cp series

Hide thumbs Also See for CP1H-X40D:

Table of Contents

Connecting Programming Devices

Items Required for USB Connection

"Programming Device" is a general term for a computer running programming

and debugging software used with OMRON Programmable Controllers.

The CX-Programmer (Ver. 6.1 and later), which runs on Windows, can be

used with CP-series Programmable Controllers. (See note.)

Note A Programming Console cannot be used with CP-series Program-

mable Controllers.

Devices can be connected to the USB port or to a serial port.

Connect the computer running the CX-One Support Software (e.g., the CX-

Programmer) using commercially available USB cable to a standard periph-

eral USB port.

The peripheral USB port (conforming to USB 1.1, B connector) is a dedicated

port for connecting Support Software, such as the CX-Programmer.

Operating system

Windows 98, Me, 2000, or XP

Support Software

CX-Programmer Ver. 6.1 (CX-One Ver. 1.1)

Included with above Support Software.

USB 1.1(or 2.0) cable (A connector-B connector), 5 m max.

Personal computer

CX-One (CX-Programmer, etc.)

Table of Contents

Cp1h-xa40d Cp1h-y20dt-d Cp1h