Omron CP1H-X40D Operation Manual page 532

LCD Option Board Function
Note
498
The following table shows the default address and the setting range for
each I/O memory type.
I/O memory type
TIM
CNT
DM
AR
IO
WR
HR
DR
IR
TK
Note LongWord has only five display types, DM, IO, WR, HR and AR.
7. Use the Forward button to move the column cursor to the display format
position.
Press the Down or Up button to select the display format &.
Select the display format in the following table.
Display format
#
+
&
8. Use the Forward button to move the column cursor to the data length po-
sition.
Press the Down or Up button to select the data length LW.
Select the data length in the following table.
Data length
W
LW
Then it will display two word data on D10001 to D10002, D10003 to
D10004 with unsigned decimal number.
The screen display will be updated immediately after the address, display for-
mat or data length is changed.
Default address
0000
0000
00000
000
0000
000
000
00
00
00
Hex number
Signed decimal number
Unsigned decimal number
One word data
Two word data
Section 8-6
Range
0000 to 4095
0000 to 4095
00000 to 32767
000 to 959
0000 to 6143
000 to 511
000 to 511
00 to 15
00 to 15
00 to 31
Meaning
Meaning