Omron CP1H-X40D Operation Manual page 598

Cpu unit sysmac cp series

Hide thumbs Also See for CP1H-X40D:

Table of Contents

Installation and Initial Setup

4. Select 1. IP address and Protocols - System to display System menu.

5. Make the required settings (i.e., the IP address in this example).

6. After entering the correct values, click the Transfer Button to transfer the

settings to the Ethernet Option Board.

7. To enable the new settings, turn the power to the Ethernet Option Board

OFF and ON again, or click the Restart Button.

Chapters

Table of Contents

Cp1h-xa40d Cp1h-y20dt-d Cp1h