Basic Operation
8-5-2
Screen Transitions
Monitor Mode
Power to the CPU Unit turns ON
Display User Monitor Screen
(See note1)
Enter Data Change Screen
+
OK
When control bit is ON
(See note1, 2)
When PLC error occurs
Note
The screen transition of the LCD Option Board as shown in the following diagram.
OK
ESC
ESC
1. The screen will be displayed after making settings in the Setup Mode.
2. The Message Screen will disappeared automatically after control bit is
OFF.
3. In the Setup Mode, if there is no operation for 10 minutes, LCD will auto-
matically switch to the Monitor Mode.
Setup Mode
Display main menu
+
ESC
ESC
Select the menu
OK
Enter the submenu
OK
Display Setup Screen
Section 8-5
ESC
ESC
489