Network Installation - Omron CP1H-X40D Operation Manual

Installation and Initial Setup
9-8-3

Network Installation

Basic Installation Precautions
Recommended products
560
• Take the greatest care when installing the Ethernet System, being sure to
follow ISO 802-3 specifications. You must obtain a copy of these specifi-
cations and be sure you understand them before attempting to install an
Ethernet System. Unless you are already experienced in installing com-
munications systems, we strongly recommend that you employ a profes-
sional to install your system.
• Do not install Ethernet equipment near sources of noise. If noise-prone
environments are unavoidable, be sure to take adequate measures
against noise interference, such as installing network components in
grounded metal cases, using optical links in the system, etc.
The following products are recommended for use with the Ethernet Option
Board.
Part Maker
Hub 100BASE-TX
OMRON W4S1-03B
OMRON W4S1-05B
(C)
PHOE- SWITCH
NIX CON- 5TX
TACT
Allied RH509E
Telesis
MR820TLX
10BASE-T
Allied RH509E
Telesis
MR820TLX
Twisted-pair 100BASE-TX
cable
Fujikura F-LINK-E
0.5mm x 4P
Fujikura CTP-LAN5
0.5mm x 4P
10BASE-T
Fujikura F-LINK-E
0.5mm x 4P
Fujikura CTP-LAN5
0.5mm x 4P
Connectors STP Plug
(Modular
Panduit MPS588
plug)
Corp
UTP Plug
Panduit MP588-C
Corp
Model
Specifications
number
10/100 Mbit/s 3-port hub
10/100 Mbit/s 5-port hub
10/100 Mbit/s 5-port hub
9-port hub
9-port hub with 10Base-5
backbone port
9-port hub
9-port hub with 10Base-5
backbone port
STP (shielded twisted-
pair) cable: Category 5, 5e
Note: Impedance is lim-
ited to 100 Ω.
UTP (unshielded twisted-
pair) cable: Category 5, 5e
STP (shielded twisted-
pair) cable: Category 3, 4,
5, 5e
Note: Impedance is lim-
ited to 100 Ω.
UTP (unshielded twisted-
pair) cable: Category 3, 4,
5, 5e
---
---
Section 9-8
Inquires
Allied Telesis
(0120) 86-0442
(in Japan only)
Allied Telesis
(0120) 86-0442
(in Japan only)
---