Compobus/S I/O Link Units - Omron CP1H-X40D Operation Manual

CompoBus/S I/O Link Units

7-6 CompoBus/S I/O Link Units
CompoBus/S Master Unit
(or SRM1 CompoBus/S
Master Control Unit)
Master PC (CS Series)
CPU Unit
Output
CIO 2000
Input
CIO 2004
478
The CP1H can function as a slave to a CompoBus/S Master Unit (or SRM1
CompoBus/S Master Control Unit) when a CP1W-SRT21 CompoBus/S I/O
Link Unit is connected. The CompoBus/S I/O Link Unit establishes an I/O link
of 8 inputs and 8 outputs between the Master Unit and the PLC. Up to three
CompoBus/S I/O Link Units, including other Expansion I/O Units, can be con-
nected to a CP1H CPU Unit.
Special flat cable or VCTF cable
From the standpoint of the CP1H CPU Unit, the 8 input bits and 8 output bits
allocated to the CompoBus/S I/O Link Unit are identical to input and output
bits allocated to Expansion I/O Units even though the CompoBus/S I/O Link
Unit does not control actual inputs and outputs. The input and output bits allo-
cated to the CompoBus/S I/O Link Unit are one side of an I/O link between the
slave CPU Unit and the CPU Unit to which the Master Unit is connected.
CompoBus/S
Master Unit
I/O memory
Unit No. 0
8 bits
8 bits
Specifications
Model number
Master/slave
Number of I/O points
Number of words allocated in
CPU Unit I/O memory
Node number setting
CP1H CPU Unit
I/O memory
8 bits
8 bits
CP1W-SRT21
CompoBus/S Slave
8 input points, 8 output points
1 input word, 1 output word
(Allocated in the same way as Expansion Units and
Expansion I/O Units.)
Set using the DIP switch
(Set before turning on the CPU Unit's power supply.)
Section 7-6
CP1W-SRT21
CompoBus/S
I/O Link Unit
ON
1 2 3 4 5 6
S
No.
COMM
ERR
SRT21
EXP
BD H N C ( BS+)
BD L N C ( BS-) N C
CP1H
CompoBus/S
I/O Link Unit
Node
number: 0
Input
CIO 2
Output
CIO 102