Offline Commissioning - Siemens SINAMICS G120 Function Manual

5.8

Offline commissioning

When you set the safety function parameters offline, you have to download them to the
inverter. Once you have downloaded them, you have to finish commissioning the safety
functions online.
The screens for the safety functions differ from each other slightly depending on whether you
work with STARTER online or offline. Follow the descriptions in this manual in order to set all
of the necessary parameters in line with the requirements of your application (this also
applies when setting the parameters offline).
Setting the safety functions offline
Procedure
To set the safety functions offline, proceed as follows:
1. Select the safety functions in STARTER.
2. Set the check mark "Copy parameters after download":
3. Set the safety function parameters offline.
4. Once you have finished setting the parameters, save your project by clicking the
You have set the safety functions of the inverter offline, and saved them to your PC or PG.
In the next step, you must transfer the settings from your PC or PG to the inverter.
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 04/2014, FW V4.7, A5E34261271B AA
When doing this, follow the descriptions of the online commissioning, also see Section:
Changing settings (Page 86).
button.
Commissioning
5.8 Offline commissioning
153