Activation Via F-Di; Safety Inputs - Siemens SINAMICS G120 Function Manual

4.3

Activation via F-DI

4.3.1

Safety inputs

In the factory setting of the inverter, the safety inputs are not assigned to the integrated
safety functions. Only when commissioning do you define whether you use, for example,
digital inputs DI 4 and DI 5 for standard functions, or by combining them, you create a safety
input.
Assignment of safety inputs
Table 4- 8
SINAMICS G120C
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 04/2014, FW V4.7, A5E34261271B AA
The SIMATIC ET 200pro FC-2 converter does not have directly
accessible safety inputs. If you wish to control the safety functions of
this inverter via an input within the ET-200pro station, then you will need
the F-RSM or F-Switch module.
Wiring examples are provided in the following section, also see Wiring
examples (Page 54).
Inverters (chassis units, IP20) with only one safety input
SINAMICS G120
with
CU240E-2
CU240E-2 DP
CU240E-2 PN
Control Units
Terminal strip Digital input
16 DI 4
17 DI 5
Installing
4.3 Activation via F-DI
Safety input
F-DI 0
51