Commissioning; Commissioning Guidelines - Siemens SINAMICS G120D Operating Instructions Manual

Commissioning

5.1

Commissioning guidelines

Overview
Converter with the control units CU240D-2
Operating Instructions, 10/2020, FW V4.7 SP13, A5E34262100B AH
1. Define the requirements to be met by the
drive for your application.
(Page 78)
2. Restore the factory settings of the con‐
verter if necessary.
(Page 92)
3. Check if the factory setting of the con‐
verter is sufficient for your application.
(Page 78)
4. Set the following for quick commission‐
ing of the drive:
– The closed-loop motor control
– The inputs and outputs
– The fieldbus interface
(Page 82)
5. Check if additional converter functions
are required for the application.
(Page 115)
6. If necessary, adapt the drive.
(Page 115)
7. Save your settings.
(Page 97)
5
75