Siemens SINAMICS G120 Function Manual page 68

Installing
4.3 Activation via F-DI
Components in separate control cabinets
If the components are located in separate control cabinets, the wiring between the SM326
I/O module and the F-DIs on the inverter must be installed such that it is protected against
cross and short-circuits.
Transfer the two signals for activating a safety function via wires in separate lines. In the
example, the signals for terminal 5 and 7 are transferred via the first wire. The signals for
terminal 6 and 8 are then transferred via the second wire.
Figure 4-19
68
Interconnecting the inverter and SM326 I/O module in separate control cabinets
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 04/2014, FW V4.7, A5E34261271B AA