Offline Commissioning; Offline Parameterization; Downloading Parameters - Siemens SINAMICS G120 Function Manual

4.5

Offline commissioning

When you set the safety function parameters offline, you have to download them to the
inverter. Once you have downloaded them, you have to finish commissioning the safety
functions online.
The screens for the safety functions differ from each other slightly depending on whether you
work with STARTER online or offline. Follow the descriptions in this manual in order to set all
of the necessary parameters in line with the requirements of your application (this also
applies when setting the parameters offline).
4.5.1

Offline parameterization

● Call up the safety functions in STARTER.
● Select the checkbox at the bottom of the dialog to copy the parameters:
● Set the safety function parameters offline.
● Once you have finished setting the parameters, save your project by clicking the
4.5.2

Downloading parameters

● Go online with STARTER and start downloading the parameters to the inverter. To do so,
● Open the safety functions screen and click the "Change Settings" and "Activate Settings"
● If the password is 0 (factory setting), you will be prompted to define a new password.
Safety Integrated Function Manual, SINAMICS G120
Function Manual, 07/2010, FW 4.3.2, A5E03052391B AA
Follow the descriptions in this manual starting with the section Selecting the
commissioning method (Page 70).
button.
click the button.
You download both the standard parameters and the parameters for the safety functions
in your STARTER project to the inverter.
buttons.
If you try to set a password that is not permissible, the old password will not be changed.
Further information can be found in the section Password (Page 40).
Commissioning
4.5 Offline commissioning
113