Basic Commissioning - Siemens Sinamics G120P Instruction Manual

The wizards
Several wizards are available that allow you to set-up various functions and commission the converter.
They navigate you interactively through the parameterization of standard applications. The wizards are
accessed from the wizards menu, at the bottom-left of the status screen.
• Always use the wheel to select an option and press OK to confirm
• Press ESC to move back one step
• Press INFO to read context-sensitive help information

Basic commissioning

• Select "Wizards" by turning the wheel
• Navigate to "Basic commissioning"
• Confirm by pressing OK
Now the wizard will guide you through several steps by presenting a number of screens where you can
choose the necessary options and values. Our example shows a standard configuration.
Operator Panels BOP-2 and IOP-2:
42
Wizards
OK
Intelligent Operator Panel
Basic commissioning
OK
OK
OK
After selecting Wizards or when
advancing with the IOP-2, some-
times a specific loading time is
required. If the screen does not
immediately change, do not
press any additional buttons as
this might cause the IOP-2 to
advance too far.
At the top of the screen, you can
see numbers that indicate the
present step of the wizard that you
are in. For example, 2/28 means
that you are in step 2 of 28.
NOTE