5.6.1
Interconnecting the "STO active" signal
If you require the feedback signal "STO active" of the inverter in your higher-level control
system, then you must appropriately interconnect the signal.
Procedure
To interconnect the "STO active" checkback signal, proceed as follows:
1. Select the button for the feedback signal.
2. In the following selection menu, select the appropriate setting for your particular
You have interconnected the "STO active" checkback signal. The inverter signals "STO
active" to the higher-level control after STO has been selected.
Parameter
r9773.01
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 04/2014, FW V4.7, A5E34261271B AA
application.
Description
1 signal: STO is active in the drive
Commissioning
5.6 Setting basic functions
91