Figure 18: Installing The Front-Mounted Router In The Rack - Juniper ACX1000 Hardware Manual

ACX1000 and ACX1100 Universal Access Router Hardware Guide
Related
Documentation
40
Align the mounting brackets with the holes in the rack rails.
4.
Install a mounting screw into each of the open mounting holes aligned with the rack,
5.
starting from the bottom.
Visually inspect the alignment of the router. If the router is installed properly in the
6.
rack, all the mounting screws on one side of the rack should be aligned with the
mounting screws on the opposite side, and the router should be level.

Figure 18: Installing the Front-Mounted Router in the Rack

Mounting rack
Site Preparation Checklist for ACX1000 and ACX1100 Routers on page 25
Installing and Connecting an ACX1000 or ACX1100 Router Overview on page 31
Installing the ACX1000 or ACX1100 Mounting Brackets on page 37
Connecting the ACX1000 or ACX1100 Router to Earth Ground on page 41
Mounting bracket
Copyright © 2013, Juniper Networks, Inc.