Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
WARNING:
To prevent injury, keep your back straight and lift with your
legs, not your back. Avoid twisting your body as you lift. Balance the load
evenly and be sure that your footing is solid.
Align the mounting brackets with the holes in the rack rails.
4.
Install a mounting screw into each of the open mounting holes aligned with the rack,
5.
starting from the bottom.
Visually inspect the alignment of the router. If the router is installed properly in the
6.
rack, all the mounting screws on one side of the rack should be aligned with the
mounting screws on the opposite side, and the router should be level.
Figure 16: Installing the Front-Mounted Router in the Rack
Mounting rack
Site Preparation Checklist for ACX2200 Routers on page 29
Installing and Connecting an ACX2200 Router Overview on page 63
Installing the ACX2200 Mounting Brackets on page 69
Connecting the ACX2200 Router to Earth Ground on page 73
Chapter 15: Installing the Router
Mounting bracket
71