Configuring An Alarm Entry - HP 1920 Gigabit Ethernet Switch Series User Manual

Configuring an alarm entry

1. Select Device > RMON from the navigation tree.
2. Click the Alarm tab.
Figure 86 Alarm entry
3. Click Add.
Figure 87 Adding an alarm entry
4. Configure an alarm entry as described in
5. Click Apply.
Table 27 Configuration items
Item
Alarm variable:
Static Item
Interface Name
Sample Item:
Table 27.
Description
Set the traffic statistics that are collected and monitored. For
more information, see Table
Set the name of the interface whose traffic statistics are
collected and monitored.
100
28.