Configuring An Snmp View - HP V1910 User Manual

Item
Contact
Location
SNMP Version
Return to SNMPv1 or SNMPv2c configuration task list

Configuring an SNMP view

Select Device  SNMP from the navigation tree, and then click the View tab to enter the page as shown in
a.
View page
a.
Creating an SNMP view
Table 23 Click Add, the Add View window appears as shown in b.
Table 24 Type the view name and click Apply, and then you enter the page as shown in c.
Create an SNMP view (1)
b.
Description
Set a character string to describe the contact information for system
maintenance.
If the device is faulty, the maintainer can contact the manufacture factory
according to the contact information of the device.
Set a character string to describe the physical location of the device.
Set the SNMP version run by the system
119
or SNMPv3 configuration task list.