Interfaces And Port Description - Cisco 8200 Series Hardware Installation Manual

Interfaces and Port Description

• Inspect routinely for dust and damage. If you suspect damage, clean and then inspect fiber ends under a

Interfaces and Port Description

Figure 12: Cisco 8201 Fixed Port Router - Front View
1
2
Hardware Installation Guide for Cisco 8200 Series Routers
26
• Do not touch the ends of connectors. Touching the ends can leave fingerprints and cause other
contamination.
microscope to determine if damage has occurred.
400G Ports (Port 0 to Port
23). 400G port supports
40GE, 100GE, 200GE,
and 400GE. All 400G port
support breakout
operation.
100G ports (Port 24 to
Port 35) support 100G and
40G. Ports 24, 26, 28, 30,
32, and 34 support 4x10G
via breakout cable.
Connect Router to the Network
3 Mini coax connector for
10MHz, input, and output.
4 Mini coax connector for 1
PPS, input, and output.