Show Rmon2 Auto-Learn Command - Avaya P333R User Manual

show rmon2 auto-learn Command

Use the show rmon2 auto-learn command to display whether auto-learn
mode is enabled or disabled.
The syntax for this command is:
show rmon2 auto-learn
Output Example:
Router-1(configure)#
rmon2 auto-learn is DISABLED
show rmon2 filters Command
Use the show rmon2 filters command to display the filters used by the host/
matrix/subnets applications.
The syntax for this command is:
show rmon2 filters
Output Example:
Router-1(configure)#
Index
----------
show rmon2 host-top-n Command
Use the show rmon2 host-top-n command to display a sorted hosts counters
list.
The syntax for this command is:
show rmon2 host-top-n [<filter>]
Example:
Router-1(super)#
Avaya P333R User's Guide
show rmon2 auto-learn
show rmon2 filters
IP Address
---------------
1 192.168.77.5
2 192.168.88.0
<filter> -
show rmon2 host-top-n ALL
Chapter 7
IP Mask
---------------------
255.255.255.255
255.255.255.0
sort based on TX | RX | ALL
Cajun Campus CLI - Layer 3
221