Chapter 6
Avaya CLI - EZ2route
show ip EZ2route groups Command
Use the show ip EZ2route groups command to list the groups rules that are
configured to the EZ2route application.
The syntax for this command is: show ip EZ2route groups
Output Example:
Console> show ip EZ2route groups
Showing 3 rows
Index
======= ===== =========== ============ =======
10
20
30
show ip EZ2route sessions Command
Use the show ip EZ2route sessions command to display EZ2route sessions.
The syntax for this command is: show ip EZ2route sessions[[<src addr>
<src mask>] <dst addr> <dst mask>]
src addr
src mask
dst addr
dst mask
Output Example:
Printing 4 Sessions.
Source IP
============== =============== ============== ===============
192.168.48.191
192.168.54.120
192.168.54.120
192.168.54.120
142
Route Source IP
No
10.1.0.0
Yes
10.1.0.0
No
0.0.0.0
The source IP address.
The source mask IP address.
The destination IP address.
The destination mask IP address.
Destination IP
192.168.50.31
192.168.36.185
192.168.50.31
192.168.50.101
Source mask
Dest IP
255.255.0.0
10.2.2.2
255.255.0.0
10.2.0.0
0.0.0.0
10.2.0.0
Next Hop IP
NH MAC
0.0.0.0
08.00.20.9f.1f.4b
0.0.0.0
00.10.5a.5e.a1.5d
0.0.0.0
08.00.20.9f.1f.4b
0.0.0.0
08.00.20.9e.c3.db
Dest mask
==========
255.255.255.255
255.255.0.0
255.255.0.0
Vlan
====
1
1
1
1
Avaya P333R User's Guide