Redistribute Command - Avaya P333R User Manual

redistribute Command

Use the redistribute command to redistribute routing information from other
protocols into OSPF. The no form of this command disables redistribution by
OSPF.
The syntax for this command is:
[no] redistribute <protocol>
protocol
Example:
Router-N(configure router:ospf)# redistribute rip
timers spf Command
Use the timers spf command to configure the delay between runs of OSPF's
SPF calculation. Use the no form of this command to restore the default (3 seconds).
The syntax for this command is:
[no] timers spf <spf-holdtime>
spf-holdtime
Example:
Router-N(configure router:ospf)# timers spf 5
Avaya P333R User's Guide
Chapter 7
[static | connected | rip]
The time in seconds of the delay between runs of
OSPF's SPF calculation.
Cajun Campus CLI - Layer 3
191