Ip Unicast Route-Cache Update-Timeout Command - Avaya P333R User Manual

ip unicast route-cache update-timeout Command

Use the ip unicast route-cache update-timeout command to configure
the timeout used to remove inactive cache entries.
Use the no form of this command to return to the default value.
The syntax for this command is:
[no] ip unicast route-cache update-timeout interval - seconds
Output Example:
Router-N(configure)# ip unicast route-cache update-timeout 600
Done!
ip netmask-format Command
Use the ip netmask-format command to specify the format of netmasks in the
show command output. The no form of this command restores to the default,
which is a dotted decimal format.
The syntax for this command is:
[no] ip netmask-format <mask-format>
The possible mask formats are:
bitcount
decimal
hexadecimal
Example:
To display netmasks in bitcount format:
Router-N(configure)# ip netmask-format bitcount
Avaya P333R User's Guide
Addresses are followed by a slash and the total number of bits
in the netmask. For example 17
The network masks are in dotted decimal notation. For
example, 255.255.255.0.
The network masks are in hexadecimal format as indicated by
the leading 0X. For example, 0XFFFFFF00.
Chapter 7 Cajun Campus CLI - Layer 3
175