Timeout Command - Avaya P333R User Manual

timeout Command

Use the timeout command to configure the timeout (in seconds) after which
SRRP declares the main router dead if it does not reply to polling.
Use the no form of this command to return to default timeout interval of 12
seconds.
The syntax for this command is:
[no] timeout <timeout>
timeout
Example:
Router-N(configure router:srrp)# timeout 6
Interface Mode
ip srrp backup Command
Use the ip srrp backup to backup an additional interface of the main router
using the SRRP application. If the main router fails, the P333R takes over its
activities on all configured interfaces.
The syntax for this command is:
ip srrp backup <main router addr>
main router addr
Example:
Router-N(config-if:marketing)# ip srrp backup 192.168.50.11
Avaya P333R User's Guide
Chapter 7
An integer (in seconds)
IP address of the interface
Cajun Campus CLI - Layer 3
203