User Mode - Avaya P333R User Manual

User Mode

show ip ospf Command
Use the show ip ospf command to display general information about OSPF
routing.
The syntax for this command is:
show ip ospf
show ip ospf interface Command
Use the show ip ospf interface command to display the OSPF-related
interface information.
The syntax for this command is:
show ip ospf interface [<interface-name>]
interface-name
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
show ip ospf neighbor Command
Use the show ip ospf neighbor command to display OSPF-neighbor
information on a per-interface basis.
The syntax for this command is: show ip ospf neighbor
[<interface-name>] [<neighbor-id>]
interface-name
neighbor-id
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
Avaya P333R User's Guide
Chapter 7
The OSPF interface name.
The OSPF interface name.
Neighbor ID.
Cajun Campus CLI - Layer 3
187