Ip Ez2Route Autolearn Command - Avaya P333R User Manual

Use the following no forms of the command to remove groups:
The syntax for this command is:
no ip EZ2route group <group index>
<group index>
Example:
Console>
Console>

ip EZ2route autolearn Command

Use the ip EZ2route autolearn command to enable automatic learning of
routers. Use the no form of this command to disable automatic learning of routers.
The default mode is autolearn.
The current autolearn status is shown when you type the command:
show ip EZ2route routers
The syntax for this command is:
[no] ip EZ2route autolearn
ip EZ2route routers-timeout Command
Use the ip EZ2route routers-timeout command to configure the timeout
before removing routers from the EZ2route tables. The no form of this command
returns the timeout to its default value. The default is 900 seconds.
The syntax for this command is:
[no] ip EZ2route routers-timeout <time>
time
Example: ip EZ2route routers-timeout 300
Avaya P333R User's Guide
no ip EZ2route group 4
no ip EZ2route group all
Time in seconds
Chapter 6
Integer | all
Avaya CLI - EZ2route
145