Rmon2 Filters Command - Avaya P333R User Manual

Chapter 7 Cajun Campus CLI - Layer 3

rmon2 filters Command

Use the rmon2 filters command to specify that the host or subnet will be monitored
by the matrix/subnet/host applications. Use the no form of this command to
remove the filter.
The syntax for this command is:
[no] rmon2 filter <index> <ip address> [<ip mask>]
Example:
To add a filter for a specific host:
rmon2 filter 1 192.168.17.13
To add a filter for a subnet:
rmon2 filter 2 192.168.33.0 255.255.255.0
rmon2 auto-learn Command
Use the rmon2 auto-learn to activate auto-learn mode. Use the no version of
this command to disable auto-learn mode
The syntax for this command is:
[no]rmon2 auto-learn
Example:
Router-N(configure)# rmon2 auto-learn
rmon2 protocol-dir Command
Use the rmon2 protocol-dir to add a protocol to the protocol directory.
The syntax for this command is:
rmon2 protocol-dir UDP|TCP <Port #> [<description> [<owner>]]
Example:
Router-N(configure)# rmon2 protocol-dir UDP 345
Router-N(configure)# rmon2 protocol-dir UDP 345 "my
Router-N(configure)# rmon2 protocol-dir UDP 345 "description"
224
description"
"I am the owner"
Avaya P333R User's Guide