Table 7.7 Bootp-Dhcp Commands - Avaya P333R User Manual

Chapter 7 Cajun Campus CLI - Layer 3
BOOTP-DHCP Commands
Table 7.7
Command
ip bootp-dhcp relay
ip bootp-dhcp Server
ip bootp-dhcp network
Configure Mode
ip bootp-dhcp relay Command
Use the ip bootp-dhcp relay command to enable relaying of bootp and dhcp
requests to the bootp/dhcp server. The no form of this command disables bootp/
dhcp relay. The default state is: disabled.
The syntax for this command is:
[no] ip bootp-dhcp relay
Example:
To enable relaying of BOOTP and DHCP requests:
Router-N(configure)# ip bootp-dhcp relay
To disable relaying of bootp and dhcp requests:
Router-N(configure)# no ip bootp-dhcp relay
204
BOOTP-DHCP Commands
Page
204
205
205
Avaya P333R User's Guide