Set Port Classification - Avaya P333R User Manual

The syntax for this command is:
set port channel [port_list] [value] [name]
port_list
value
name
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
Output Example:
P330-1(super)# set port channel 1/1-3 on test
Port 1/1 channel mode set to on
Port 1/2 was added to channel
Port 1/3 was added to channel

set port classification

Use the set port classification command to set the port classification to
either regular or valuable. Any change in the Spanning Tree state from Forwarding
for a valuable port will erase all learnt MAC addresses in the stack.
The syntax for this command is:
set port classification [module/port]
module port
regular | valuable
Output Example:
P330-1(super)# set port classification 2/19 valuable
Port 2/19 classification has been changed.
Avaya P333T-PWR User's Guide
Switch and ports to bundle (format: module/port)
on/off to enable/disable a channel for the specified module
ports
Channel name
switch/port range
port classification
Chapter 5 CLI – Layer 2
{regular | valuable}
101