Clear Log - Avaya P333R User Manual

clear log

Use the clear log command to delete the Log file of a switch.
The syntax for this command is:
clear log [<mod_num>]
clear port mirror
Use the clear port mirror command to cancel port mirroring.
The syntax for this command is:
clear port mirror <source-module>/<source-port>/<dest-
module>/<dest-port>
Output Example:
P330-N# clear port mirror 1/2/1/4
this command will delete the port mirror entry
- do you want to continue (Y/N)?
Mirroring packets from port 1/2 to port 1/4 is cleared
clear secure mac
Use the clear secure mac command to remove a MAC address from the CAM
table of a secured port.
Note: This command is not supported by the P330-ML switches.
Note: If this command is to be implemented on a stack with P330-ML as the stack
master, a session should be opened to the relevant switch.
The syntax for this command is:
clear secure mac <mac-address> port <mod-num>/<port-num>
Output Example:
P330-N> clear secure mac 1-2-3-4-5 port 1/17
01-02-03-04-05 cleared from secure address list for port 1/17
Avaya P333T-PWR User's Guide
Chapter 5
y
CLI – Layer 2
83