Table of Contents
Advertisement
Chapter 7
Cajun Campus CLI - Layer 3
ip vrrp timer Command
Use the ip vrrp timer command to set the virtual router advertisement timer
value (in seconds) for the virtual router ID. Use the no form of this command to
restore the default value.
The syntax for this command is: [no] ip vrrp <vr-id> timer <value>
vr-id
value
Example:
To set the virtual router advertisement timer value for virtual router 3 to 2:
Router-N(config-if:marketing)# ip vrrp 3 timer 2
ip vrrp priority Command
Use the ip vrrp priority command to set the virtual router priority value
used when selecting a master router. Use the no form of this command to restore
the default value.
The syntax for this command is:
[no] ip vrrp <vr-id> priority <pri-value>
vr-id
pri-value
Example:
To set the priority value for virtual router 1 to 10:
Router-N(config-if:marketing)# ip vrrp 1 priority 10
198
Virtual Router ID (1-255)
The advertisement transmit time (seconds).
Virtual Router ID (1-255)
The priority value. The range is 1-254.
Avaya P333R User's Guide
Advertisement
Table of Contents
