Preparation - Mazda MX-5 1990 Workshop Manual

B
DISASSEMBL V
PREPARATION
SST
49 E301 060
Brake, ring gear
49 E301 062
Collar
(Part of
49 E301 060)
49 6012 006
Pivot, valve
spri ng lifter
49 0221 061A
Remover
&
i n-
staller, piston pin
DISASSEMBL V
For prevention of 49 E301 061
engine rotation
Body
(Part of
49 E301 060)
For prevention of 49 0636 100A
engine rotation
Arm, valve spring
lifter
For removal and 49 S120 170
installation of
valves
For removal and
installation of pis-
ton pins
Remover, valve
seal
J
til
1
For p'revention of
engine rotation
For removal and
installation of
valves
For removal of
valve seals
05UOBX-090
1. Code all identical parts (such as piston, piston rings, connecting rods, and valve springs) so that they
can be reinstalled in the cylinder from which they were removed.
2. Clean the parts with a steam cleaner. Blow off any remaining water with compressed air.
Note
• During disassembly of any part or system, be sure to study its order of assembly. Also, note
any deformation, wear, or damage.
05UOBX-091
8-36
-