Mazda MX-5 1990 Workshop Manual page 665

LIGHTING SYSTEM
T
76U14X·034
05UOTX·323
REAR COMBINATION LIGHT LENS
Replacement of Rear Combination Light Lens
1. Use a hot air blower to soften the "hot melt" (bonding agent)
arou nd the lens.
2. Remove the lens from the light housing by pushing the rear
of the lens with a hammer handle or round bar.
3. Heat the light housing, and remove the "hot melt" and any
fragments of the lens.
Note
• The "hot melt" should be reused
if
possible.
• If the "hot melt" can be reused, the Step 4 is un-
necessary.
4. Put Uni-sealer (8531 77 739) adhesive in the light hous-
ing groove.
5. Fit the new lens onto the light housing. Press the lens firm-
ly so that it will adhere.
T-83