Bluetooth ® Preparation - Mazda CX-9 2016 Owner's Manual

Interior Features
Audio Set
Bluetooth Preparation
®
Device pairing
To use Bluetooth ® audio and Hands-Free,
the device equipped with Bluetooth
to be paired to the unit using the following
procedure. A maximum of seven devices
including Bluetooth
®
hands-free mobile phones can be paired.
NOTE
The Bluetooth system may not operate
®
for 1 or 2 minutes after the ignition
is switched to ACC or ON. However,
this does not indicate a problem. If the
Bluetooth system does not connect
®
automatically after 1 or 2 minutes have
elapsed, make sure that the Bluetooth
setting on the device is normal and attempt
to reconnect the Bluetooth
the vehicle side.
Pairing Procedure
1. Select the icon on the home screen
to display the Settings screen.
2. Select the
3. Select .
4. Turn the Bluetooth
5. Select
message and switch to the device
operation.
6. Using your device, perform a search
for the Bluetooth
®
device).
7. Select "Mazda" from the device list
searched by the device.
5–44
® has
audio devices and
®
device from
®
tab.
setting on.
®
to display the
device (Peripheral
8. (Device with Bluetooth
Input the displayed 4-digit pairing code
into the device.
(Device with Bluetooth
or higher)
Make sure the displayed 6-digit code
on the audio is also displayed on the
device, and touch the
Connection permission and phonebook
access permission for your mobile
device may be required depending on
the mobile device.
9. If pairing is successful, the functions of
the device connected to Bluetooth
displayed.
10. (Devices compatible with Mazda
E-mail / SMS function)
SMS (Short Message Service)
messages, and E-mail for the device are
downloaded automatically. A download
permission operation for your device
may be required depending on the
device.
NOTE
When Call history and messages are
downloaded automatically, each automatic
download setting must be on.
Refer to Communication Settings on page
5-67 .
After a device is registered, the system
automatically identi es the device. By
activating Bluetooth ®
by activating Bluetooth
after switching the ignition from OFF to
ACC, the device connection condition is
indicated in the center display.
version 2.0)
®
version 2.1
®
.
are
®
Hands-Free again, or
Hands-Free rst
®