B
ON-VEHICLE MAINTENANC.E
HLA
Removal I Installation
Caution
• Obtain the code number and deactivate the audio anti-theft system before disconnecting the
battery. (Refer to page T -113.)
• Position the hose clamp in the original location on the hose, and squeeze the clamp lightly
with large pliers to ensure a good fit.
1 . Disconnect the negative battery cable.
2. Drain the engine coolant.
3. Remove in the order shown in the figure, referring to
Removal Note.
4. Install in the reverse order of removal, referring to
Installation Note.
I -- - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - -
~
- - - -
l
1. Timing belt
Removal/Installation .................. page 8-12
2. Crank angle sensor
Installation Note .......................... page 8-23
3. Camshaft pulley
Removal Note ............................. page 8-21
Installation Note .......................... page 6-22
8-20
4. Camshaft
11.3-14.2 N·m
(1.15-1.45
m-kg,
100-126
In-Ib)
-~
4
JOURNALS
AND.
CAM FACES
•
05U08X·047
Removal Note ............................. page 8-21
Installation Note .......................... page 8-21
5.HLA
Removal Note ............................. page 8-21
Installation Note .......................... page 8-21
Inspection ................................... page 8-54