Mazda MX-5 1990 Workshop Manual page 738

T
T-156
AIR BAG SYSTEM
05UOTX-433
05UOTX-434
8.8-12.7 N·m (90-130 em-kg. 78-113 In-Ib)
S-SENSOR
05UOTX-435
D-sensor (CNT)
1. Disconnect the negative battery cable.
2. Disconnect the D-sensor (eNT) connectors.
3. Remove the wiring clips.
4. Remove the bolts and the D-sensor (eNT).
5. Install the D-sensor (eNT) in the reverse order of removal,
referring to the Installation Note.
Installation note
• Position the sensor with the arrow toward the front
of the vehicle.
• Tighten the mounting bolts to the specified torque.
Tightening torque:
8.8-12.7 N·m (90-130 cm-kg, 78-113 in-Ib)
S-sensor
1. Disconnect the negative battery cable.
2. Remove the instrument panel. (Refer to Section S.)
3. Disconnect the S-sensor connectors.
4. Remove the bolts and S-sensor.
5. Install the S-sensor in the reverse order of removal, refer-
ring to the Installation Note.
Installation note
• Position the sensor with the arrow toward the front
of the vehicle.
• Tighten the mounting bolts to the specified torque.
Tightening torque:
8.8-12.7 N·m (8.8-12.7 cm-kg, 78-113 in-Ib)
-.