Top Fabric - Mazda MX-5 1990 Workshop Manual

END PLATE
DOUBLE-SIDED
ADHESIVE TAPE
CONVERTIBLE TOP
s
05UOSX-127
05UOSX-128
Disassembly Note
Top fabric
1. Remove the convertible top from the body.
(Refer to page 8-61.)
Note
• Set the convertible top upside down on a clean
surface.
2. Remove the set plate, weatherstrips, and retainers.
3. Remove the rivets from the link assembly with a drill.
Drill size= ¢4.0mm (¢O.16 in)
4. Remove the rivets with a drill and remove the screws from
the link assembly. Remove the end plates.
Drill size: ¢4.0mm (cf>O.16 in)
Note
• Fold the convertible top.
5. Remove the top fabric from the link assembly.
6. Remove the top fabric from the front header.
8-63