Mazda MX-5 1990 Workshop Manual page 373

05UOJX-054
97UOJ1-080
05UOJX-055
,
-
. I
TRANSMISSION
J
Caution
• The total thickness of the front and rear washers
should be 5.9-6.0mm (O.2323-0.2362 in).
4. The following washer thicknesses are available.
2.2mm (0.0866 in) 3.2mm (0.1260 in)
2.7mm (0.1063 in) 3.7mm (0.1457 in)
3.0mm (0.1181 in)
Intermediate housing
I
I
1. Apply sealant to the contacting surfaces of the intermedi-
ate housing and bearing housing.
2. Mount the intermediate housing to the bearing housing by
tapping it lightly with a plastic hammer.
Roll pin
Caution
• Install the roll pin with the seam facing forward.
Install a new roll pin into each shift rod end.
J-41