WINDOW REGULATOR, GLASS, AND GUIDE
1. Vertical adjustment of door glass
Adjustment procedure
s
Remove the weatherstrip, and check alignment with the door glass in the fully-closed position.
(1) Loosen upper stop installation bolts (A).
(2) Adjust by moving the upper stop up or down so that the upper edge of the door glass is in the correct
position, and then tighten bolts (A).
Note
• When the door glass is raised, both glass stop must contact the upper stop simultaneously.
• Before an upper stop is moved for adjustment, lower the door glass slightly.
SEC. A-A
CONVERTIBLE TOP
RETAINER MOUNTING HOLE No.5
RETAINER MOUNTING HOLE No.1
15 0.59)
®
E
~ETAINER MO~NTING
HOLE NO.:
~;/ETAINER
MOUNTING HOLE NO.8
A
DETACHABLE HARD TOP
RETAINER MOUNTING HOLE No.1
15 (0.59)
®
E
/--j/RETAINER MOUNTING HOLE No.3
jRETAINER MOUNTING HOLE NO.5 F
~
) RETAINER MOUNTING HOLE No.6 _____
-lUU
I
a
16 (0.62)
@
9.4
±
2.0 (0.37
±
0.09)
r o E T A I N E R
GLASS
d
@
9.1
±
2.0 (0.36
±
0.08)
SEC. E-E
SEC. F-F
mm (in)
05UOSX-014
8-11