Headlight Aiming; Retractor Hinge - Mazda MX-5 1990 Workshop Manual

VERTICAL
ADJUSTMENT
.r-
~
0MOTORLlN~
LIGHTING SYSTEM
T
05UOTX·106
05UOTX·107
05UOTX·108
••
05UOTX·109
Adjustment
Headlight aiming
1. Adjust the tire air pressure to specification.
2. Turn on the retractor switch to raise the retractable head-
lights.
3. Position the unloaded vehicle on a flat, level surface.
4. Adjust the headlights to meet local regulations by turning
the two adjusting screws.
Retractor hinge
1. Begin with the headlights fully retracted.
Caution
• Before disconnecting the negative battery cable,
verify the 10 code number of audio anti-theft
• If not, an a dio unit may not operate after recon-
function.
1
necting the negative battery cable .
2. Disconnect the negative battery cable.
3. Disconnect the motor link.
4. Lower the retractor hinge until the hinge is stopped by the
stop.
5. Adjust the stop so that the headlight lid is flush with the fend-
er and hood .
T-55