1_-
.
E
FAN MOTOR
05UOEX-027
REPLACEMENT
Caution
FAN MOTOR
INSPECTION
1. Check that the battery is fully charged.
2. Disconnect the fan motor connector.
3. Connect the battery and an ammeter to the fan motor con-
nector.
4. Verify that current is as specified.
Current:
5.3-6.5A
5. If current is not within specification and/or the fan does not
turn smoothly, replace the fan motor.
• Obtain the code number and deactivate the audio anti-theft system before disconnecting t h e - -
battery. (Refer to page T -113.)
1. Disconnect the negative battery cable.
2. Drain the engine coolant.
3. Remove in the order shown in the figure.
4. Install in the reverse order of removal.
1.0-2.0 N·m
1. Cooling fan connector
2 Cooling fan
E-12
3.9-4.9 N·m
(40-50 em·kg,
35-43 In.lb)
05UOEX-028
3. Radiator cowling
4. Fan motor