Retractor Motor; Retractor Switch - Mazda MX-5 1990 Workshop Manual

T
HEAD
LIGHT
RELAY
HEAD
r-----
I
I 0
I
I
I
I
I
I
I
HU L _________ _
H~EAD
HU
Q@'
' l ¥E
BA B TNS
T-56
LIGHTING SYSTEM
05UOTX-110
05UOTX-111
TNS
RELAY
05UOTX-112
Inspection
Retractor motor
1. Disconnect the motor link.
2. Disconnect the retractor motor connector.
3. Connect 12V to terminal f and ground terminal a of the mo-
tor connector.
4. Check the motor operation when connecting 12V as shown.
Terminal
Motor operation
12V Ground
c
a Motor rotates to raised position
d a Motor rotates to retracted position
5. If not as specified, replace the retractor motor.
Retractor switch
1 . Remove the retractor switch.
2. Check for continuity between terminals of the switch.
Terminal
Switch
b d
Off
On
O~--t---
0---0:
Indicates continuity
3. If not as specified, replace the retractor switch.
Headlight switch
U.S.
spec.
1. Remove the knee protector.
2. Disconnect the combination switch connector.
3. Check for continuity between terminals of the switch.
Position
Terminal
E HL HU
TNS
HEAD
SA
0 -0
Low beam
Headlight
0 D
0 -0
High beam
-0
Passing
0
Tail, Parking
0 -0
0---0:
Indicates continuity
S
-0
4. If not as specified, replace the combination switch as an
assembly.