Mazda MX-5 1990 Workshop Manual page 475

p
PARKING BRAKE SYSTEM
Removal/Inspection /Installation ,.
1. Block the wheels firmly.
2. Release the parking brake.
3. Remove in the order shown in the figure.
4. Inspect all parts and repair or replace as necessary.
5. Install in the reverse order of removal, referring to Installation Note.
6. After installation:
Adjust the parking lever stroke. (Refer to page
P-27.)
-r----®
1. Screw 6. Cap
2. Cover
7. Spring
3. Bolt Inspect for weakness
4. Parking brake switch 8. Bolt
Installation ................................... page P-28
9. Parking brake lever
5. Adjusting nut and clip
I nspect for damage and cracks
Installation note
Parking brake switch
05UOPX-058
1. Install the parking brake switch so that it contacts the park-
ing brake lever when the lever is fully released.
(CD)
8RAKE
P-28
9MUOPX-110
2. Turn the ignition switch ON, and check that the parking
brake warning lamp illuminates with the lever pulled one
notch.